Cutting miter joints on a table saw can be hard. A standard miter gauge just doesn't offer the precision required to set accurate angles. More often than not you end up with annoying gaps, time spent sanding and wasted material.
Now you can combine MiterSet with your standard miter gauge. MiterSet is a category of miter gauge jig that quickly and easily sets your miter gauge to precise angles for cutting perfect miter joints every time.
MiterSet Standard is an aluminum plate bisected by a miter gauge slot. It has hole patterns for setting left and right angles up to 52.5°.
The number pattern on each plate sector represents 5° on your miter gauge. Slide your miter gauge into the miter slot. Place one pin at 00 and the other pin in the numbered hole that represents the degree angle you want to cut - right or left. Now slide your miter gauge against the two pins and lock it down. It's that simple. Your miter gauge will now cut perfect miter joints. No gaps. No sanding. No waste!
The detent bar is notched from .5° to 2.5° in .5° increments. Place the detent bar against the pins and allow the detent bar to recess against the angle that you would like to cut. For example, when the pin is set at 20 degrees and the detent bar is set at 2.5 degrees the total angle is 22.5 degrees. Slide your miter gauge against the detent bar and lock it down.
All components are proudly Made in the USA.
This product fits all standard U.S. miter gauges that require a .75" miter slot.
|4 segments||45° angle|
|5 segments||36° angle|
|6 segments||30° angle|
|8 segments||22.5° angle|
|9 segments||20° angle|
|10 segments||18° angle|
|12 segments||15° angle|
|15 segments||12° angle|
|18 segments||10° angle|
|20 segments||9° angle|
|24 segments||7.5° angle|
|30 segments||6° angle|
|36 segments||5° angle|
|40 segments||4.5° angle|
|60 segments||3° angle|
Alert: This MiterSet jig is not compatible with the Dewalt 745 and 748 contractor table saw. This saw uses a bar with an inverted T-shape and it will not fit the miter slot within the plate.
This MiterSet jig is not configured to support Shopsmith. You can purchase the Shopsmith version of MiterSet directly at www.shopsmith.com.